Case Studies
Motor Spindles
E4000 series
♯ Special Purpose Machine
♯ Drilling
♯ Aluminum
♯ Other
♯ φ2.1～φ3.0
φ3㎜ Drilling (A7075)
Product： BMS-4020-MQL-CHK
Spindle O.D.：φ40mm
- Product series
- E4000
- Product
- BMS-4020-MQL-CHK
- Spindle O.D.
- φ40mm
- Tools
- NACHi Aqua drill EX flat oil hole
L/D=3 φ3 AQDEXZOH3D0300 - Work
- Aluminum alloy (A7075)
- Hole depth
- 9mm (L/D=3) Blind hole Non-step
- Coolant
- processing
Non-water-soluble cutting oil (1.5MPa)
Internal coolant
-
Drilling Condition
-
Machining mounted
Drilling condition
| NACHI | NAKANISHI | |
|---|---|---|
| Cutting Speed [m/min] | 70.7 | 141.3 |
| Spindle Speed [min-1] | 7,400 | 15,000 |
| Feed Rate [mm/rev] | 0.071 | 0.066 |
| Feed [mm/min] | 532 | 1,000 |
Comparison result
Cutting Speed [m/min] 2times
Spindle Speed[min-1] 2times
Feed[mm/min] 2times
Point
E4000 controller ：Two load meter lighting（continuous duty area）
This CHK-type slim spindle head can get close to the work,
the tool over hang can be minimized.
The processing efficiency is improved by 2 times on the grounds that
Spindle speed and feed can be increased.
↓
The minimized tool overhang enables precise processing.
The tool life improves due to efficient chip evacuation.
