Case Studies
Motor Spindles
E3000 Series
♯ Special Purpose Machine
♯ Milling
♯ Steel
φ3.0㎜ End milling (S50C)
Product： EMR-3008K
Spindle O.D.：φ30mm
- Product Series
- E3000
- Product
- EMR-3008K
- Spindle O.D.
- φ30mm
- Tools
- NS TOOLφ3㎜ 2-Flute MUGEN-COATING
Carbide end mill MSE230 φ3.0 - Work
- Carbon steel S50C
- Cutting
- Side milling, Down cut
- Coolant
- Non-water-soluble cutting oil
Cutting Condition
| NS TOOL | NAKANISHI | |
|---|---|---|
| Cutting Speed [m/min] | 50－80 | 75 |
| Spindle Speed [min-1] | 6,900 | 8,000 |
| Feed [mm/min] | 280 | 480 |
| Feed Rate [mm/tooth] | 0.02 | 0.03 |
| Depth of cut Ap×Ae [mm] | 4.5×0.3 | 0.6×2.7 |
| E3000 Controller load meter | － | 1 load meter lighting (continuous duty operation) |
| Surface Roughness Ry [μm] Right Angle Direction /Processing Direction | － | 4.2899 /1.8901 |
Comparison result
Processing Efficiency 2.1times
