Case Studies
Motor Spindles
E3000 Series
♯ Special Purpose Machine
♯ Milling
♯ Aluminum
♯ Other
♯ φ2.1～φ3.0
φ2.5㎜ End milling (A2017)
Product： EMS-3060K
Spindle O.D.：φ30mm
- Product Series
- E3000
- Product
- EMS-3060K
- Spindle O.D.
- φ30mm
- Tools
- NS TOOLφ2.5㎜ 2-Flute MUGEN-COATING Carbide
end mill MSE230φ2.0 - Work
- Aluminum alloy A2017
- Cutting
- Side milling, Down cut
- Coolant
- Non-water-soluble cutting oil
Cutting Condition
| NS TOOL | NAKANISHI | |
|---|---|---|
| Cutting Speed [m/min] | 100－200 | 471 |
| Spindle Speed [min-1] | 19,100 | 60,000 |
| Feed [mm/min] | 760 | 2,400 |
| Feed Rate [mm/tooth] | 0.02 | 0.02 |
| Depth of cut Ap×Ae [mm] | 3.75×0.5 | 0.5×2.25 |
| E3000 Controller load meter | － | 1 load meter lighting (continuous duty operation) |
| Surface Roughness Ry [μm] Right Angle Direction /Processing Direction | － | 2.9051 /3.4337 |
Comparison result
Processing Efficiency 1.9times
