Case Studies
Motor Spindles
E3000 Series
♯ Special Purpose Machine
♯ Milling
♯ Stainless
φ2.5㎜ End milling (SUS304)
Product： EMR-3008K
Spindle O.D.：φ30mm
- Product Series
- E3000
- Product
- EMR-3008K
- Spindle O.D.
- φ30mm
- Tools
- NS TOOL Φ2.5㎜ 2-Flute MUGEN-COATING Carbide
end mill MSE230 φ2.5 - Work
- Stainless steel SUS304
- Cutting
- Side milling, Down cut
- Coolant
- Non-water-soluble cutting oil
Cutting Condition
| NS TOOL | NAKANISHI | |
|---|---|---|
| Cutting Speed [m/min] | 50－70 | 63 |
| Spindle Speed [min-1] | 7,600 | 8,000 |
| Feed [mm/min] | 180 | 240 |
| Feed Rate [mm/tooth] | 0.012 | 0.015 |
| Depth of cut Ap×Ae [mm] | 3.75×0.175 | 0.5×2.25 |
| E3000 Controller load meter | － | 1 load meter lighting (continuous duty operation) |
| Surface Roughness Ry [μm] Right Angle Direction /Processing Direction | － | 6.7537 /2.7469 |
Comparison result
Processing Efficiency 2.3times
