Case Studies
Motor Spindles
E3000 Series
♯ Special Purpose Machine
♯ Milling
♯ Stainless
♯ Other
♯ φ1.1～φ2.0
φ2.0㎜ End milling (SUS304)
Product： EMS-3060K
Spindle O.D.：φ30mm
- Product Series
- E3000
- Product
- EMS-3060K
- Spindle O.D.
- φ30mm
- Tools
- NS TOOLφ2㎜ 2-Flute MUGEN-COATING
Carbide end mill MSE230 φ2.0 - Work
- Stainless steel SUS304
- Cutting
- Side milling, Down cut
- Coolant
- Non-water-soluble cutting oil
Cutting Condition
| NS TOOL | NAKANISHI | |
|---|---|---|
| Cutting Speed [m/min] | 50－70 | 126 |
| Spindle Speed [min-1] | 9,500 | 20,000 |
| Feed [mm/min] | 170 | 400 |
| Feed Rate [mm/tooth] | 0.009 | 0.01 |
| Depth of cut Ap×Ae [mm] | 3×0.14 | 0.4×1.8 |
| E3000 Controller load meter | － | 1 load meter lighting (continuous duty operation) |
| Surface Roughness Ry [μm] Right Angle Direction /Processing Direction | － | 1.7638 /1.4065 |
Point
Processing Efficiency 4times
